We are a refractory material manufacturer, with four major factories: heavy brick factory, light brick factory, monolithic refractory factory and fused-cast brick factory.
We promise to provide you with high-quality refractory materials.
Product introduction of magnesia carbon brick
Magnesia carbon brick is made of high purity magnesium powder, carbon material (including graphite) and tar pitch or resin by batching, hot mixing and forming, roasting at about 300℃ or above 1000℃.
Details of magnesia carbon brick
Due to the serious damage of magnesia carbon bricks in the new ladle during the preheating process, the loose decarbonized layer can reach 30~60mm thick. This layer is washed off during the injection of molten steel, bringing the magnesia particles into the molten slag. Obviously, preventing the carbon in magnesia carbon brick from being burned off during preheating is one of the important steps to improve the service life of magnesia carbon brick in ladle clearance and slag line. In addition to adding compound anti-oxidant to magnesia carbon brick, the key is to cover the surface of magnesia carbon brick with low-melt glass phase liquid containing alkali after lining, so as to protect the carbon in magnesia carbon brick from being burned off during the preheating process of ladle.
Parameters of Magnesia carbon brick
| Type | Apparent Porosity % ≤ | Bulk Density g/cm³ | Cold Crushing Strength MPa ≥ | MgO % ≥ | C ≥ |
| MT-5A | 5 | 3.15±0.08 | 50 | 85 | 5 |
| MT-5B | 6 | 3.10±0.08 | 50 | 84 | 5 |
| MT-5C | 7 | 3.00±0.08 | 45 | 82 | 5 |
| MT-8A | 4.5 | 3.12±0.08 | 45 | 82 | 8 |
| MT-8B | 5 | 3.08±0.08 | 45 | 81 | 8 |
| MT-8C | 6 | 2.98±0.08 | 40 | 79 | 8 |
| MT-10A | 4 | 3.10±0.08 | 40 | 80 | 10 |
| MT-10B | 4.5 | 3.05±0.08 | 40 | 79 | 10 |
| MT-10C | 5 | 3.00±0.08 | 35 | 77 | 10 |
| MT-12A | 4 | 3.05±0.08 | 40 | 78 | 12 |
| MT-12B | 4 | 3.02±0.08 | 35 | 77 | 12 |
| MT-12C | 4.5 | 3.00±0.08 | 35 | 75 | 12 |
| MT-14A | 3.5 | 3.03±0.08 | 40 | 76 | 14 |
| MT-14B | 3.5 | 2.98±0.08 | 35 | 74 | 14 |
| MT-14C | 4 | 2.95±0.08 | 35 | 75 | 14 |
| MT-16A | 3.5 | 3.00±0.08 | 35 | 74 | 16 |
| MT-16B | 3.5 | 2.95±0.08 | 35 | 72 | 16 |
| MT-16C | 4 | 2.90±0.08 | 30 | 70 | 16 |
| MT-18A | 3 | 2.97±0.08 | 35 | 72 | 18 |
| MT-18B | 3.5 | 2.92±0.08 | 30 | 70 | 18 |
| MT-18C | 4 | 2.87±0.08 | 30 | 69 | 18 |